We serve you at the highest level as the most transparent company in roofing in Kingwood.
Note: This diagram contains segment lengths (rounded to the nearest whole number) over 5.0 Feet. In some cases, segment labels have been removed for readability. Plus signs preface some numbers to avoid confusion when rotated (e.g. +6 and +9).
Pitch values are shown in inches per foot, and arrows indicate slope direction. The predominant pitch on this roof is 8/12.
Note: This diagram contains labeled pitches for facet areas larger than 20.0 square feet. In some cases, pitch labels have been removed for readability. Blue shading indicates a pitch of 3/12 and greater. Gray shading indicates flat, 1/12 or 2/12 pitches.
Note: This diagram shows the square feet of each roof facet (rounded to the nearest Foot). The total area in square feet, at the top of this page, is based on the non-rounded values of each roof facet (rounded to the nearest square foot after being totaled).
Roof facets are labeled from smallest to largest (A to Z) for easy reference
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
Authority having jurisdiction is City of Houston
Ice and Water Shield on Eaves: Not Required
Drip Edge: Required on Eaves and Rakes
Valley Liner: Required
Chimney Cricket: If chimney (or any roof structure) is wider than 30 inches, yes it is required.
The total cost of your roof project located in Kingwood, Texas is: $25,420
TIP: Types of Nails To Know About:
Smooth Shank - Galvanized coil nails are the least expensive nails available. Galvanized coil nails are either hot dipped or electrogalvanized. These nails are applied through a nail gun. The zinc coating will wear out over time and is guaranteed to rust.
Ring Shanked - Galvanized coil nails provide more security and resistance to the shingle as it is secured into the wood deck. These nails are applied through a nail gun. The zinc coating will wear out over time and is guaranteed to rust.
Stainless Steel Coil Nails - Rust-proof nails that are great for coastal where salt water can get trapped in between the shingles.
Copper Nails - expensive nails that are important when installing copper valleys, specialty shingles like wood shake, and Grand Manor Shingles.
Plastic Cap Nails - most commonly used to seal the underlayment or felt.
Metal Cap Nails - are ring shanked; used in rolled roofing and the peel and stick roofing base sheet to help prevent sliding and shifting (which occurs over time).
Roof systems shall be designed and installed in accordance with the jurisdictional authority named above and the approved manufacturer's installation instructions such that the roof system shall serve to protect the building or structure.
The roofing company performing the work shall act in accordance with the standard of care to ensure up-to-date methods, standards and practices are adhered to. Deviation from such or instructing one to deviate can result in a defect and is subject to an enforceable violation of the jurisdictional authority building codes.